No Items
New Equipment Implements and Attachments Wood Chippers John Deere WC12 Series

John Deere WC12 Series

NEW

John Deere WC12 Series

Local Pickup Only
John Deere Financial | Apply Today
Get A Quote
Key Features
    • Pull-type unit with drawbar
    • Adjustable discharge chute
    • Reversible, hydraulic feed roll
View More Specs
John Deere WC12 Series
Features
Specifications
Brochure

Adjustable discharge chute accurately discharges to desired location

Adjustable discharge chute with handle Adjustable discharge chute with handle
Rotates 360 degrees Rotates 360 degrees

The discharge chute rotates 360 degrees for fast and easy positioning.

 

The chute also features an adjustable deflector to accurately direct the wood chips to the desired location.

Hydraulic feedroll mounted on spring-loaded frame

WC12 Series hydraulic feedroll frame WC12 Series hydraulic feedroll frame
#

The hydraulic feedroll is mounted on a spring-loaded frame on the WC12 Series Wood Chippers, allowing it to raise up and down depending on the size of the timber going through. 

 

The speed of the feedroll can be adjusted on the side of the wood chipper with the hydraulic flow valve.

Reversible feedroll has three positions that are easy to adjust on the feed box

Feed box with handle Feed box with handle
Reversible feedroll Reversible feedroll

Engagement of the feedroll is done by pushing or pulling the handle that wraps around the outside of the feed box. The feedroll has three positions: neutral, reverse, feed (forward).

 

The feedroll grabs the material as it is fed into the chipper and allows the operator to step away while it automatically pulls material into the knives.

Self-contained hydraulic kit for WC12 Series Wood Chippers

This factory-installed, self-contained hydraulic kit is for tractors with less than 22.7 L/min (6 gpm) of hydraulic capacity or with no available rear selective control valves (SCVs). The kit contains a hydraulic reservoir and power take-off (PTO) driven hydraulic pump.

Chip opening 229×406 mm
9×16 in.
Hopper opening 711×1067 mm
28×42 in.
System Hydraulic
Feed_x001A_roller diameter 393.7 mm
15.5 in.
Hopper height 68.6 cm
27.5 in.
Fixed
Adjustable Rotation: 360 degree (angle)
Unit 1161.2 kg
2560 lb
Rotor style Drum
Rotor 222.3 kg
490 lb
PTO rpm 540 rpm
HP range (Tractor PTO hp) 56-86 kW
75-115 hp
Category Pull-type
iMatch™ or Quik-Coupler
Requirements 30.3 L/min
8 gpm
Self-contained system Optional
Knife quantity Two
Knife size 1.59×11.43×22.86 mm
0.625×4.5×9 in.
Knife bolt Gr 8 hex head bolts: 15.9 mm
0.625 in.
Shear bar A8 Hardened Anvil
Rotor rpm 2050 rpm
Number Five
Type B-7 banded belt
Labor hours 0.5
Time period 1 year
Date collected
View Brochure
Specs
Build Your Own
Financing
Powered by Lapero