Learn
Articles

Equipment Knowledge Center

FAQs
Fuel Filters – History & How-Tos

What Is a Fuel Filter? Engines rely on a clean, uninterrupted supply of fuel mixed with air to run efficiently. When you’re operating equipment in dusty or dirty environments — […]

What You Should Know About Spark Plugs In 2026

Whether you’re cutting acres of thick pasture grass or hauling tools around your property in a John Deere Gator, your equipment depends on one small but mighty component: the spark plug. It’s a part most people don’t think […]

Why John Deere Oil Filters Matter: What They Do and Why They’re Essential for Your Engine

What an Oil Filter Actually Does Your engine oil is like the bloodstream of your machine, and the oil filter is basically its liver—minus the ability to complain after a […]

How Connected Machines Give Commercial Mowing Companies the Edge This Season

Spring means a rush of mowing contracts, tight schedules, and the pressure to keep every machine cutting without interruption. For commercial mowing companies, the difference between a profitable season and a stressful one […]

Meet The New John Deere Z997M, Z997R, and Z998R Diesel Zero Turns

Below, we break down everything commercial operators need to know. Check out our comparison of the Z997M, Z997R, and the new Z998R. We’ll talk through: Pricing varies by configuration—contact your […]

How to Choose the Right Size Tractor For Your Acreage

Learn which type of tractor is right for the size of your property.
See All Articles
Drive-Over Mower

A John Deere Auto-Connect™ deck, sometimes called a “belly mower,” attaches to the middle of the tractor and offers a precision cut. It’s fast and easy to take on and off from the seat of the tractor, without the need for tools or ramps. These mowers come in different widths, such as 54-inches or 60-inches, and compatibility differs by tractor model.

Learn More

Front End Loader

The frame and hydraulic attachment for your tractor. Often equipped with a loader bucket for moving material, but can also be equipped with grapples, pallet forks, bale spears, or other attachments.

Rotary Tiller

Prepare soil for planting gardens with little effort. Curved tines on a rotating shaft powered by the PTO deliver a fine, clod-free seedbed.

Learn More

Rotary Cutter

Sometimes called a ‘bush hog’, these tools are meant to tame brush and tall grass with a rough cut like pastures and back lots.

Learn More

Centerlink

The other type of link in the 3-point hitch, situated above and between of the draft links. This link twists to allow proper leveling of implements.

ENCORE Performance Plan

Lock in maintenance for hassle-free ownership at a low cost with a TriGreen exclusive ENCORE maintenance plan.

Learn More
See More
Do you sell pre-owned equipment?

TriGreen Equipment accepts trade-ins and has an ever-changing selection of used tractors, mowers, construction and agriculture equipment. You can view all pre-owned equipment here.

What brands of new equipment do you carry?

TriGreen Equipment is proud to stock quality machinery from a variety of brands, however most of our equipment is manufactured by John Deere. We also offer handheld power tools from Stihl, ECHO, Shindaiwa, and EGO. You can explore all of the brands we offer here.

When should I buy new equipment?

The choice to buy new equipment depends on the best interests of your operations. Generally, new equipment is less likely to require expensive repairs, protected by the manufacturer’s warranty, features the latest in innovative technology, and could provide tax advantages since new equipment is considered a capital asset investment.

Where should I buy new equipment?

Visit any one of our locations throughout Alabama and Tennessee, where one of our tried and true employees can help you find the new John Deere equipment you need.

How can I finance new equipment?

TriGreen Equipment finances new and used agricultural, landscaping and grounds care, and residential equipment through John Deere Financial. Apply for financing online here!

When should I repair equipment?

Knowing when it is better to repair or replace your equipment is critical to getting the most from your investments. Repairing equipment that requires frequent service can cost you. Newer models may also include new features or better performance.

Equipment is an investment. Therefore, the decision of whether to repair or replace equipment should focus on the return you can get from your initial investment and the machinery’s services. Consider consulting with a service manager at one of our service departments to determine if a repair would be cost-effective.

Ensuring equipment is well-maintained to operate safely and at peak performance is critical. TriGreen Equipment services the full lineup of John Deere Equipment, including equipment inspections and maintenance programs to ensure your machine is taken care of for its full lifespan.

Where should I buy replacement parts?

Finding the part that is designed specifically for the exact make and model of your machine — at the right price — isn’t always easy. Fortunately, TriGreen stocks parts designed specifically for John Deere equipment, with knowledgeable parts specialists at each of our 28 locations. Parts can also be purchased online and shipped to you or to your closest TriGreen location.
Careers
Locations

Albertville, AL

256-850-4679

Learn More ->

Arab, AL

256-586-8304

Learn More ->

Athens, AL (Tanner)

256-232-2131

Learn More ->

Centre, AL

256-927-2300

Learn More ->

Columbia, TN

931-388-1557

Learn More ->

Cookeville, TN

931-526-8544

Learn More ->

Crossville, TN

931-340-1012

Learn More ->

Cullman, AL

256-739-5601

Learn More ->

Dickson, TN

615-229-2400

Learn More ->

Fayetteville, TN

931-433-5620

Learn More ->

Florence, AL

256-757-9080

Learn More ->

Fort Payne, AL

256-997-9089

Learn More ->

Franklin, TN

615-794-8187

Learn More ->

Gadsden, AL

256-456-5872

Learn More ->

Hendersonville, TN

615-824-9726

Learn More ->

Huntsville, AL

256-830-4020

Learn More ->

Jasper, AL

205-384-3058

Learn More ->

Leeds, AL

205-703-2525

Learn More ->

Leighton, AL

256-446-5929

Learn More ->

Manchester, TN

931-728-5400

Learn More ->

McMinnville, TN

931-668-1784

Learn More ->

Mount Juliet, TN

615-754-2600

Learn More ->

Murfreesboro, TN

615-890-6258

Learn More ->

Oxford, AL

256-832-1335

Learn More ->

Pelham, AL

205-605-0412

Learn More ->

Scottsboro, AL

256-259-0704

Learn More ->

Snead, AL

205-466-7163

Learn More ->

Winchester, TN

931-967-5144

Learn More ->

View all locations

Home Workshop Air Tools AT-3311-J

AT-3311-J

NEW

AT-3311-J

Local Pickup Only

Get A Quote

AT-3311-J

Features

1/4-in. Angle Die Grinder
Torque/operating speed: 25,500 rpm

Powered by Lapero