New WR31 Series

Wheel Rakes
Key Features
  • High capacity design reduces crop plugging
  • Large rake wheels minimize leaf loss
  • Rake with one or both arms as needed
  • Optional center kicker wheel

More Info


Individual wheel hub grease zerks
Easy maintenance with accessible grease zerksEasy maintenance with accessible grease zerks

The ability to properly lubricate moving parts, such as the wheel, extends the life of these parts, leading to increased uptime.

Quick field adjustments

The WR31 Series High-Capacity Carted Wheel Rake has three easy adjustment points to fine-tune windrows and gather more hay in each bale.

Adjustable down-pressure springAdjustable down-pressure spring

1. Simply change down pressure by adjusting a spring to the desired setting for accuracy on uneven terrain.

Increase crop volume by adjusting simple adjustmentIncrease crop volume by adjusting simple adjustment

2. Adjust wheel rake width to gather higher volumes of crop by adjusting a single pin and clip.

Windrow jack for quick and easy adjustmentsWindrow jack for quick and easy adjustments
Adjusting windrow widthAdjusting windrow width

3. Fine-tune the windrow width by utilizing the jack to adjust the pitch of the wheel rake beams to get the right size windrow for the baler.

Large raking wheels for added productivity
High-quality hay with larger raking wheelsHigh-quality hay with larger raking wheels

The 152.4-cm (60-in.) diameter raking wheels of the WR31 Series have fewer revolutions per hour than a smaller raking wheel traveling at the same ground speed. This reduction in revolutions minimizes crop leaf loss, leading operators to produce higher quality hay. A larger diameter wheel will have a longer wear life, increasing the life of the raking tines.

Kwik Pik wheel system
Rake arms in position with Kwik Pik systemRake arms in position with Kwik Pik system
Kwik Pik system mechanismKwik Pik system mechanism

The Kwik Pik system lifts both rake arms at the same time. This system allows for immediate clearance of the rake wheels from the crop, which in turn does not affect the windrow form during headland turns. Headland turns can be made faster, increasing productivity and uptime for the operator. The windrows will maintain a rectangular shape for easy pickup with a baler.

High-capacity design
High frame clearance increases productivityHigh frame clearance increases productivity

The WR31 Series High-Capacity Carted Wheel Rake has a high frame clearance and an increased distance between the transport wheels and raking wheels, measured at 81.3 cm (32 in.) and 45.7 cm (18 in.) respectively. This clearance allows for a high volume of crop to flow through the rake, reducing crop plugging while increasing productivity.

Adjustable hitch to match wide array of tractor bar heights
Convenient and quick hitch adjustmentsConvenient and quick hitch adjustments

The adjustable hitch allows for added versatility with the WR31 Series High-Capacity Carted Wheel Rake. With the wide array of tractor tire sizes and drawbar heights, hitch adjustments add more convenience for large hay operations.

Single tractor selective control valve (SCV) with double-acting valve
Double features increase pressure and cycle timeDouble features increase pressure and cycle time

The double-acting valve allows hydraulic pressure to flow both in and out, providing a 25 percent faster hydraulic cycle time.


Compare >>>

Select up to 2 models to compare specifications

John DeereWR31 Series
Add Model
Add Model
Transport width 3.05 m
10.0 ft
Transport length 5.18 m
17 ft
Frame clearance 83.57 cm
32.9 in.
Raking width Minimum
4.57 m
15.0 ftMaximum
5.79 m
19 ft
Windrow width Minimum
91.44 cm
36 in.Maximum
152.4 cm
60 in.
Transport height 2.18 m
7.15 ft
NOTE: Transport heights can vary based on unit setup. Dimensions are for reference only.
Implement 635.03 kg
1,400 lb
Shipping 780.18 kg
1,720 lb
Rake wheel
Quantity Eight
Diameter 152.4 cm
60 in.
Hubs Tapered bearings
Teeth per wheel 40
Teeth diameter 7.6 mm
0.3 in.
Flex up Limited
Flex down Limited
Tractor compatibility
Horsepower requirements
SCV Type
Dual-acting (DA) valveQuantity
Electrical requirement
Minimum tractor size
Transport Size
Lights None
Marking SMV
Hitch jack Standard
Safety chain Standard
Set-up time
Labor hours Five hours
Time period One year