New 1830

Specifications

Compare >>> Select up to 2 models to compare specifications

John Deere1830

Add Model --Please Select-- SD440A

Add Model --Please Select-- SD440A

Spacing and width #1	Spacing - 19.05 cm 7.5 in. Width - 18.6 m 61 ft
Spacing and width #2
Spacing and width #3
Spacing and width #4
Spacing and width #5
Spacing and width #6
Spacing and width #7
Spacing and width #8
Spacing and width #9
Spacing and width #10

Road clearance with sweep	40.6 cm 16 in.
Transport width	5-section model: 6.2, 15.4, 18.1 m 20.3, 50.5, 59.4 ft
Nominal mainframe width (between wing-fold pivots)	4.19 m 13.75 ft
Number of seed openers	Primary air package configurations for the 1830
Spacing and width #1	Working width 18.1 m 59.375 ft Transport height with harrow 5.53 m 18.13 ft Transport height without harrow 5.49 m 18 ft Minimum temporary height reduction with sweeps 508 mm 20 in. Nominal inner wing width (between wing-fold pivots) 3.82 m 12.55 ft Weight With typical options: 16,330 kg 36,000 lb Spacing - 19.05 cm 7.5 in. Width - 18.6 m 61 ft
Spacing and width #2
Spacing and width #3
Spacing and width #4
Spacing and width #5	Minimum temporary height reduction with sweeps --
Spacing and width #6
Spacing and width #7
Spacing and width #8
Spacing and width #9
Spacing and width #10
Spacing and width #11
Spacing and width #12
Spacing and width #13
Spacing and width #14
Spacing and width #15
Spacing and width #16
Spacing and width #17
Spacing and width #18
Spacing and width #19

Type #1	Spacing 19.05, 25.40, or 31.75 cm 7.5, 10, or 12.5 in. Dimensions 31.75 x 50.8 x 711 mm 1.25 x 2 x 28 in. Trip force 51 degree: 2.45 kN 550 lb-ft Tru-Position™ - 51 degree (angle)
Type #2
Type #3
Penetration force
Underframe clearance	71.12 cm 28 in.

Type #1
Type #2

Centerframe width	4.19 m 13.75 ft
Cross members	10.16 x 10.16 cm 4 x 4 in.
End tubes	102 x 102 x 9.5 mm 4 x 4 x 3/8 in.
Hitch	Pin: 50.8 mm 2 in.
Hitch category	Category 4
Seeding tool depth control	Adjustable mechanical stop
Mainframe and wing flexibility	Diagonal flex

Length	Hitch pin to rear of transport wheels 9.95 m 32.67 ft Lateral frame clearance, opener to opener 76.2 cm 30 in. Fore-aft frame clearance between ranks 73.66 cm 29 in. Front of front cross member to front of rear cross member (4 ranks) 2.21 m 7.25 ft 9.95 m 32.67 ft

Type	Optional two-bar tine-tooth

Size	Steel On 7.5-, 10- or 12.5-in. spacing: 7.6 x 53.3 cm (15.7 kg) 3 x 21 in. (34.7 lb) On 10- or 12.5-in. spacing: 10.2 x 55.9 cm (16.3 kg) 4 x 22 in. (35.9 lb) Semi-pneumatic On 7.5-, 10- or 12.5-in. spacing: 7.6 x 53.3 cm (16.9 kg) 3 x 21 in. (37.2 lb) On 10- or 12.5-in. spacing: 10.2 x 53.3, 14 x 53.3 cm (19, 23.4 kg) 4 x 21, 5.5 x 21 in. (41.8, 51.6 lb) Split 36.8 kg 81.2 lb

Tire specifications	Tire link

Minimum SCVs	Two
Tractor hydraulic circuit requirements	One selective control for frame lift; one selective control for wing fold and transport wheels
Tractor hydraulic pressure requirement	61-ft: 172.4 bar/min 2500 psi/min

34-ft.
41-ft.
50-ft.
56-ft.
57-ft.
61-ft.	317 kW 425 hp
76-ft.
40-ft.
60-ft.

F.O.B.	Valley City, North Dakota